February 4th, 2010 viraj.kataria@iaac.net Posted in Asim Hameed, Viraj Kataria | No Comments »
February 3rd, 2010 lourdes.marcano@iaac.net Posted in Ekaterina Ageeva, Kathleen Anderson, Lourdes del Carmen Marcano Ramos | No Comments »



February 1st, 2010 kathleen.anderson@iaac.net Posted in Ekaterina Ageeva, Kathleen Anderson, Lourdes del Carmen Marcano Ramos | No Comments »





January 27th, 2010 hristo.topchiev@iaac.net Posted in Hristo Topchiev | No Comments »
January 27th, 2010 tomasz.starczewski@iaac.net Posted in Tomasz Starczewski | No Comments »

GENERAL INFORMATION
Ginkgo biloba can grow to be a huge, bold-textured and an urban-tolerant shade tree. The species form usually matures at about 24m tall by 18m wide under urban conditions, but specimen trees in open areas can get much larger. This is also one of the oldest trees still living on Earth, and a deciduous gymnosperm by botanical classification. Some scientists now believe that in China they were found trees which are more than 2500 years old.

CONCLUSIONS VS. DESIGN
Ginkgo is a young tree and still has to grow, so we should not prevent this process with our house. moreover, we can’t be sure about the space it is going to need for the future. Because of that reason the structure should not really on the trunk or the branches, which are still young enough and probably fragile. This means that we could experiment with a vertical space, which can step on the ground and support itself without having support from the tree. That kind of structure has to be public, because of the park, which is a public space. It has to provoke public interest, so the space need to be active – for fun and relaxation. The logical connection between the artificial structure and the tree can be the natural vertical element – the trunk. Because of the vertical structure and the natural need to go up, the space needs a climbing grid. By using technologies we could bring people back in the park, giving them an option to be part of the modern society, but also close to the nature. The structure could be a mix of technology, architecture and natural elements, creating symbiosis with ginkgo.


CLIMBING PROCESS
Capacity pads on every steps wich provoke sound. Climbing structure wich follow and collect your movement on every step, so you can make your own music. After the climbing you can download your music create by your activity.



January 27th, 2010 miquel.lloveras@iaac.net Posted in Miquel Lloveras Corbalan | No Comments »




Estos diagramas tratan de analizar todas las influencias ambientales que actuaran en nuestro arbol, a traves del analisis de distintas estciones meteorologicas de la ciudad. Sabemos por tanto lo que ocurre en ese lugar y mas en concreto en la situacion del arbol.


Primeras ideas






Project
Piel interior

Esta piel de Efte puede estar aliada a través de algas y aire, esto nos genera por un lado el cerramiento interior y por otro a traves de la diferencia de presion nos genera un edificio performativo que se nutre del efecto que genera el viento en las lamas.

Christopher Alexandre sugiuere una casa formada por gruesas paredes -tic walls- sobre las que los havitantes puedan ir “escarbando” hasta poder formar armarios, asientos, estanterias, o ligares havitables dentro de la pared.
Esta és la filosofia que de algun modo se ha intentado seguir en este “parasito” formando una piel que intenta seguir la naturaleza generando sus formas y mimetizandose con ellas. Piel nunca mejor dicho ya que intenta resguardar a modo de una segunda piel, donde pasan cosas.
Es el programa una maquina de tejido natural que ayuda al arbol(forma parte de él), la posibilidad de mirar al exterior sin ser visto (a traves de los tubos deEfte cromados),la eficiencia energética que nos da el sistema (Efte) creando el clima similar al que nos generaria una galeria cerrada, y ese lucernario superior que expulsa el calor (ximenea solar) el edificio como un insecto respira.

se trata de una piel que regula la temperatura del interior, para mover esa masa de aire se emplea el sistema que usan las centrales eléctricas para chimeneas solares. A modo de un invernadero esta pielde varios plasticos al incidirle el sol el aire del interior del edificio se calienta y se genera un camvio de resion este al ser caliente sube hasta la parte superior.

L piel genera agua naturalmente por las mañanas, son como las raices y ademas se estructuran -twist- siguiendo el diagrama estructural del tronco mismo.
Al incorporarle algas el edificio reacciona con el sol.
Piel exterior


Analizamos la incidencia solar en la piel del edificio y teniendo en cuenta los puntos mas irradiados generamos la piel interior de esta manera se consigue una temperatura optima, pudiendo estudiar la proieccion de las sombras i por tanto como sera la piel, ademas de actuar sobre la piel verde interior que se activa generando energia.
Ademas podemos crear un “pattern” de sombras solares de todo el añoia que la proyeccion interior es uno de los puntos importantes de este sistema contructivo.




SistEM

El suelo responde a la misma estrategia que la piel exterior pero en este caso se trata de una plancha de madera de 8 cm de grosor a la que se le puede aplicar toda una serie de recorridos a través por ejemplo del milling. Los huecos de la madera responden a la proyeccion de los recorridos de las personas, actua a modo de rampa adaptandose a la curbatura de la pared al mismo tiempo.


Las lamas son de poly-Tetra-fluoro que es un material muy flexible y resistente, material que nos permite generar la forma que dio la maqueta. Una de las propiedades de utilizar este recurso material es que la propia curbatura de las lamas nos genera la geometria por si mismo sin necesidad apenas de estructuras de soporte interiores (solo serian necesarias tres uniones para cubrir los 7 metros que tiene nuestra construccion) solo necesitaremos un numero mayor a las tres necesarias devido a la piel hay que hacerla por partes por el tamaño y por las maquinas de corte laser (IAAC 1,5 x 3m).
el estudio Cloud 9 ha desarrollado una patente a traves de un polycarbonato donde se recoje la humedad, por tanto generariamos agua que se almacenaria bajo el suelo del edificio y que se utilizaria para regar.

January 27th, 2010 emil.burulyanov@iaac.net Posted in Emil Burulyanov, Fabio Andres Lopez Mora | No Comments »
January 12th, 2010 pedro.precedo@iaac.net Posted in Pedro Precedo | No Comments »



December 5th, 2009 jacek.markusiewicz@iaac.net Posted in Ander Gortazar Balerdi, Jacek Markusiewicz | No Comments »

The ginkgo man picks up the gingko fruits and brings them to Collserola, “if everybody did the same, we’d had more trees in Barcelona” he says. In a way, he uses our ginkgo to help Ginkgo, an action that, if it was repeted, would follow the ginkgo’s pattern: one becomes two, two becomes four and so on.

So how can we help him achieving his objective? Could we build him a tribute in the ginkgo so that he can use it as its place? A house, a tribune, a game, a class, a monument?
The house would be a place to be, to read, to rest, to sleep. But also a bench to sit, to speak, to breath, to think. A house for the ginkgo man and for children, a reference that will remind the youngest generations the need of taking care nature.





The bicycle wheel, the most simple tensagrity system, is the image that shows the concept of the structure.
The moebius strip represents the idea of the house: exterior becomes interior and vice versa. A solid based in the moebius strip enables to have a dynamic structure, a place to sit and to take cover. This structure can be easily made by a series of sections, that go from vertical to horizontal. In addition, a perforation in the structure allows us to join the covered space with the exterior one.

In addition, a perforation in the structure allows us to join the covered space with the exterior one.
December 2nd, 2009 melat.asfaw@iaac.net Posted in Felipe Pecegueiro do Amaral Curado, Melat Assefa Asfaw, Uncategorized | No Comments »




